Anritsu Mp1763b 50 MHz - 12.5 GHz Pulse Pattern Generator

Anritsu MP1763B Pulse Pattern Generator (50 MHz - 12.5 GHz) Technical Specifications

• Operating Frequency Limit: Ultra-wideband signal generation from 50 MHz to 12.5 GHz with internal or external clock synchronization.

• Clock Resolution: 1 kHz step resolution throughout the operating frequency range when the internal synthesizer option is active.

• Pattern Options: Standard PRBS data sequences (2⁷-1 to 2³¹-1 bits), zero substitution sequence, and programmable 8 Mbit user-defined DATA structure.

• Mark Ratio Variation: Flexible marking selection with 0/8, 1/8, 1/4, 1/2, 3/4, 7/8, and 8/8 ratios on bit sequences.

• Error Injection: Precise bit error addition function to test data accuracy, with 1×10⁻³ to 1×10⁻⁹ error range.

• Data Output Amplitude: Dynamically adjustable differential output level from 0.25 Vp-p to 2.0 Vp-p under 50 Ω termination.

• Clock Output Power: Controllable dual-phase clock outputs with amplitude from 0.1 Vp-p to 2.0 Vp-p at 50 Ω impedance.

• Delay Time: Phase and delay optimization between data and clock signals with ±500 ps time window and 1 ps steps.

• Signal Structure and Offset: Full compatibility with ECL (Emitter-Coupled Logic) logic levels and adjustable independent offset voltage control within ±2 V range.

• Remote Control Interface: Standard integrated GPIB interface on the rear panel for automation test laboratories and remote management.

• Memory Management: 3.5-inch floppy disk drive on the front panel on the front panel to save and load created test templates and device profile settings.