Fluke 787 Digital Multimeter

Fluke 787 ProcessMeter Process Type Digital Multimeter and Calibrator Technical Features

• Product Type: Digital Multimeter and Loop Calibrator

• Manufacturer: Fluke Corporation

• Model Code: Fluke 787

• Screen Resolution: 4,000 count for measurements, 30,000 count for DC current measurements, backlit LCD screen

• Measurement Method: 1 kHz True RMS technology that accurately captures non-linear wave shapes in AC voltage measurements

• DC Voltage Measurement Range: 400.0 mV to 1000 V

• AC Voltage Measurement Range: 400.0 mV to 1000 V

• DC Current Measurement Range: 0 to 30,000 mA

• AC/DC High Current Range: 0 to 1,000 A

• Resistance Measurement Range: 400.0 Ω to 40.00 MΩ

• Frequency Measurement Range: 0.5 Hz to 19,999 kHz

• Diode and Continuity Test: 2.4 V open circuit voltage diode test and audible warning for values below 100 Ω

• Screen Signal Modes: Min / Max / Average recording, TouchHold, and Relative modes

• DC Current Output Range: 0.000 mA to 20,000 mA or 4,000 mA to 20,000 mA

• Current Output Accuracy: 0.05% of full scale

• Drive Capacity: Maximum 500 Ω load with internal battery at 20 mA current

• Simulation Mode: 0-24 mA transmitter simulation with external 24 V loop power supply

• Ramp and Stepping Outputs: 25% stepped manual scaling with automatic step and automatic slope functions

• Voltage Overload Protection: 1000 V RMS overload protection on V, Ohm, and frequency terminals

• Current Input Fuses: 30 mA 150V and 440 mA 1000V fast fuse for mA input; 11 A 1000V fast fuse for high current input

• Safety Standard Compliance: CAT III 1000 V insulation protection according to IEC 61010-1 standards

• Operating Temperature: -20 °C to +55 °C

• Battery Type and Life: Typical 50 hours in measurement mode and 12 hours with 12 mA current using a single 9V Alkaline battery

• Dimensions and Weight: 52 mm x 98 mm x 201 mm, approximately 600 g